Take 5 Visual Reports for Kanban

This content is syndicated from Edge of Chaos | Agile Development Blog by Olga Kouzina. To view the original post in full, click here.

In this installment of the dataviz series, I will tell about some visual reports that might be of interest for Kanban practitioners.

We all know Kanban as a process that has production flow visualized on a board. The to-dos (or work) get started in Backlog (or in the Planned or Open state), then they get to In Progress (or to any other variety thereof), and end up in Done.

Kanban flow

So, yes, we all know about Kanban, but some of you might be less familiar with the reports that go along with it. If Scrum comes with only 2 visual reports (the iteration and release burn down charts), Kanban has several of them, and you will see now how those visual reports can be of help.

Cumulative Flow Diagram

…is the first and foremost report.  It shows how work “accumulates in flow” (hence the name) with time.

cumulative flow diagram

What can you get out of this visual? First, the correlation between the ToDo (or Planned) work, the In Progress work, and the Done work broken down by weeks. The diagnosis for the team that has such a sleek CFD is nothing short of utopian, by the way. The light blue layer is ToDo, the green layer is Done, the beige layer in the middle is Work In Progress. You can see that if the blue To Do layer gets too thick, this means that the backlog needs good grooming (maybe some part of it shouldn’t be in the ToDo state, but in some other pre-production state, similarly to what I’ve described in my recent 3D Backlog Management post). If the beige In Progress layer gets too thick, someone has to set reasonable Work In Progress limits. Well, the only layer of those three that looks good when it’s fat is the green one.  A point to note about CFDs: they work well if you want the bottomline diagnostics report  for only 3 states. If your Kanban process includes some sub-varieties of them, the report would get too clogged and would make no sense.

CFD reminds me of the tectonic layers and the Earth formation process. An easy way to memorize the logic of this report would be this: the more rugged the outline of the layers is, the more turbulent the process, the more bottlenecks it has. Ideally, this report would have all the surfaces even, where the blue layer (the ocean surface) remains serene and almost untouched, this means just a few to do’s are added, the seabed layer (the work in progress) is reasonably thin, and the solid baseline layer of the Done work (the Earth crust) is getting thicker and thicker (but that’s utopian…).

Lead and Cycle Time Report

… is another visual report that is so vital for Kanban.  Actually, the lead time report is not that helpful for software product development, as it covers the time that work seats in pre-production state (read, in any of the backlog states), whereas the cycle time is a pure “work in progress” span. The lead time would have more meaning for hardware production, where people look at it as the measure of how long the storage space is occupied with the parts, for instance, and they need to adjust their process accordingly. For software development, no warehouses and storage spaces are needed, that’s why only the cycle time report would matter *unless the work items are requests that come from customers. In this case, a short lead time would suggest that those requests are implemented fast.

cycle time by month

The cycle time report above shows an abrupt spike of completed user stories in November. This probably means that the team worked full gear to get as much as possible done for some major milestone. Later on it went back to a rather even development flow. Besides, the correlation between completed stories and bugs is supposed to show, ideally, if it was a quality work. April looks very well, as it had 12.4 user stories completed with only 3 bugs. You get the idea.

Process Control Chart

… feeds on lead and cycle time reports. It shows if the development process is healthy and under control. Take a look:

Process Control Chart

If most user stories are scattered around the median line, it means that all is well with the process, and most of the user stories are done within the average time to complete. You can also identify any “odd sheep”, like the story that took 34 days to complete, or even 80. At this point, the process control chart has nothing more to say, and we need to click this odd bubble to find out the reasons for its oddity. This is our next report:

Visual History

visual history flow

It indeed uncovers some of the reasons, as you can see from the screen above (the red boxes at the bottom are bugs). This story has been thrown back and forth from state to state, it had a suite of bugs, and not all of them were fixed… what an unfortunate user story.

Lead and Cycle Time Distribution

Finally, there’s one visual report for Kanban that can give a forecast. While all the other reports just diagnose how things were going in the past, this one predicts how likely it is that some user story will be released in any given amount of days. If we look under the hood, this report is powered by the historical data from lead and cycle time reports:

Cycle Time Distribution

You can read more about some practical uses for lead and cycle time distribution chart here.

If you need those reports for your work, feel free to look into the peephole on the right :)

Leave a Reply

Your email address will not be published. Required fields are marked *

two × five =

There are 101 ways to do anything.
To find the best way, sometimes you need expert help

What People Say

“Kelly was engaged as a Program Director on a complex business and technology transformation program for Suncorp Commercial Insurance. Kelly drew on his key capabilities and depth of experience to bring together disparate parties in a harmonised way, ensuring the initiate and concept phases of the program were understood and well formulated. Excellent outcome in a very short time frame. ”


“Kelly and I worked together on a very large project trying to secure a new Insurer client. Kelly had fantastic commercial awareness as well as his technical expertise. Without him I would never had secured this client so I owe a lot to him. He is also a really great guy!”


“I worked with Kelly whilst at Thoughtworks and found him to be a most inspiring individual, his common-sense approach coupled with a deep understanding of Agile and business makes him an invaluable asset to any organisation. I can't recommend Kelly enough.”


“Kelly is an Agile heavy-weight. He came in to assess my multi-million $ Agile development program which wasn’t delivering the right throughput. He interviewed most of the team and made some key recommendations that, when implemented, showed immediate results. I couldn’t ask for more than that except he’s a really nice guy as well.”


“Kelly revolutionised the way our digital department operated. A true advocate of agile principles, he quickly improved internal communication within our teams and our internal clients by aligning our business and creating a much enhanced sense of transparency in the decisions the business was making. Kelly also introduced a higher sense of empowerment to the development teams...”


“Kelly’s a leading program director with the ability to take charge from day one and keep strong momentum at both a program and project level driving prioritisation, resourcing and budgeting agendas. Kelly operates with an easy-going style and possesses a strong facilitation skill set. From my 5 months experience working with Kelly, I would recommend Kelly to program manage large scale, complex, cross company change programs both from a business and IT perspective.”


“I worked with Kelly on many projects at IPC and I was always impressed with his approach to all of them, always ensuring the most commercially viable route was taken. He is great at managing relationships and it was always a pleasure working with him.”


“Kelly was a great colleague to work with - highly competent, trustworthy and generally a nice bloke.”


“Kelly was a brilliant CTO and a great support to me in the time we worked together. I owe Kelly a great deal in terms of direction and how to get things done under sometimes difficult circumstances. Thanks Kelly.”


“Kelly came to the department and has really made a huge impact on how the department communicates, collaborates and generally gets things done. We were already developing in an agile way, but Kelly has brought us even more into alignment with agile and scrum best practices, being eager to share information and willing to work with us to change our processes rather than dictate how things must be done. He is highly knowledgable about agile development (as his active blog proves) but his blog won't show what a friendly and knowledgeable guy he is. I highly recommend Kelly to anyone looking for a CTO or a seminar on agile/scrum practices - you won't be disappointed!”


“Kelly is an extremely talented and visionary leader. As such he manages to inspire all around him to achieve their best. He is passionate about agile and has a wealth of experience to bring to bear in this area. If you're 'lucky' he might even tell you all about his agile blog. Above all this, Kelly is great fun to work with. He is always relaxed and never gets stressed - and trust me, he had plenty of opportunity here! If you get the chance to work with Kelly, don't pass it up.”



To explore how we can help you, please get in touch